Rudder fittings rule clarification please

[mutt]

The measurement guide state "The overall length includes the stem band (if fitted) but excludes normal rudder fittings within 60mm of the centreline"
What constitutes "normal" in these circumstances?
I am planning a rocking plate system to change the angle the rudder makes with the waterline between -2 and +7 degrees. I do not expect the plate to extend more than a couple of inches beyond the transom and the whole mechanism will be contained within 60mm of the centreline. However the rudder fittings will not be off-the-shelf pintle or gudgeons.
Please could someone from the technical committee respond as to whether the system is likely to pass measurement?
Cheers
Matt
N3486

[John Meadowcroft]

Matt
I will send you an email.  This is not the best 'forum' to get an answer to this type of a question.  Best to go direct to Jon Brown with these sort of questions - number and email is in the book. 
Meds

[mutt]

Thanks john,
I don't have the book so please could someone send me Jon Browns, and Gavin Wilkins numbers. Much appreciated
Matt
N3486